The new "2019 Model-B" pet net
barrier improved on the curved top design! 51" wide x 44" tall can
install behind the front seats of any vehicle with or without grab
handles, now locking suctions cups can attach to your window to hold the net in place.
We made the rod longer, more flexible and increased the visibility by
lowering the horizontal support band! The main advantage of the curved
design (In the raised position) is to help keep determined paws from
pushing down on the top of the netting. Our K9 friends are smart! Over
time they have learned how to defeat the straight top models.... We
decided to "throw them a curve" with this new, curved design - only from
CURVED TOP - (Optional): You can choose to have the
curve raised, or let it hang down, depending on your visibility
requirements. In smaller vehicles, the curve reaches all the way to the
ceiling. It is very flexible and will bend slightly to conform to the
shape of your roof... also helping it to stay in position.
choose to let the curve hang down, remove the fiberglass rod and place
the extra netting between the seat and the netting to keep it secure.
OVERHEAD HANDLES: Most vehicles have front seat,
overhead handles. These handles are the best way to secure the top
corners of your Pet Net Barrier. What if your car doesn't have overhead
handles? With the new Model-B pet net barrier we now include 2 suction
cup hooks that attach to your car window. Please use caution if you attach to the window - remove the bungee before you open your door!
"hook" bungee cords can be installed in several different
configurations depending on the width of your vehicle. Each
configuration changes the length of the bungee cord so that you can
adapt it for diiferent size vehicles and get the tension just right!
- Both "hooks" in the grommet, looped once around the overhead handle.
- Both "hooks" in the grommet, looped twice around the overhead handle.
- One "hook" in the grommet, other hook looped around handle and hooked on itself.
SIDE (Door Pillar) HANDLES: If you have a mini-van, or SUV, this may be your only option to secure the top corners.
The same three "hook" bungee cord configurations mentioned above work with side handles.
... you can also place one hook onto the headrest vertical metal
support bar, rather than both in the grommet, if you need more tension.
SEE-THROUGH: mesh is Tough & Durable - stands up
to pet nails! The mesh is designed to allow good visibility when using
your rear-view mirror. If the solid cross-seam interferes with your rear
vision - simply adjust the pet net up or down.
COVERAGE: Completely covers the console area and the space between each front seat.
(main Pet Net area is 51" wide (44" tall).
44 inches too tall? Adjust the height down by flexing the curve down
against your roof ... OR you can drop the curve completely after
removing the rod.
* 51 inches too wide? Adjust the width using the spare top/bottom grommets!
EASY TO INSTALL: Unlike the metal pet barriers, the
Travelin K9 pet net barrier is very easy to install and remove with the 6
included bungee straps. Top corners attach to the handles above each
door (or side handles in some SUV's, Trucks & Mini-Vans), bottom
corners attach by wrapping the bungee around the seatbelt housing near
the floor (or by wrapping around a portion of the seat frame). Front
headrests provide an additional attachment point via the ball bungee
Optional Curved Top - Helps prevent your dog from pushing the Pet Net down with their paws.
(1) Fiberglass Rod helps maintain the top curved shape.